The Fast Chip SMD Removal Kit is a quick and inexpensive way to remove SMD components from a PCB without a hot air station using only your soldering iron.
Removes QFP's, PLCC's, SOIC's, and chip components under 149°C (300°F)
Kit Contents: 823mm (2.7') Fast Chip Removal Alloy, one 2cc tube of SRA TF5000 No Clean Rework Paste Flux and complete instructions for SMD Removal and Cleanup
Enough material to remove 8-10 SMD's
Lead-free alternative for SC-SRA-FC-SMD-KIT
Made in the USA
The heart of the kit is the length of the Fast Chip low-temperature removal alloy. This alloy is like a solder that melts at temperatures well below that of normal solder (57.7°C / 136°F) and stays liquid long enough to melt the existing solder, allowing you time to carefully remove the component.
Simply apply a liberal amount of the included flux to the pins of the chip that you want to remove, then use a soldering iron with a flat-edge tip to heat the pins while applying the low-temperature alloy. The alloy will remain liquid for a few seconds while you coat all of the connections, once you've coated the pins you should be able to lift the chip free using tweezers or a hemostat. Clean the pads thoroughly and apply fresh solder and you're ready to solder a new part in place.
SRA Soldering products have made a name for themselves in America for being affordable, quality products that are all made in the USA.